Single Art Building Material GRC Products

Since its entry into the country in the 1990s, GRC has been widely used and constructed with features such as easy molding, strong decorativeness, pressure resistance, and anti-aging properties. Its appearance made life easier for construction. Instead of constructing certain words that could not be expressed, the circulation of lines was like a string to play. The pattern on the lines was like every note played, and the refined sculpture represented every construction. On the inside, it portrays the soul of the small scene in the courtyard, and the thickening of the Roman column shows the momentum.

The effect of the sculpture is not only a sculpture but a conciseness of the civilization in an attraction. The soul of a building is the focus of the environment.

Appearance planning

Planning is a messy task. The quality of the GRC project is here. Now it is almost planned by the planning institute to follow the main structure. It is both abstract and vague. In addition to the ability to deepen the drawings, the manufacturers must also have the responsibility to carefully check the scene.

Mold manufacturing

There is a large work channel in the indoor bright hall, aluminum alloy strips, various measuring tools, cutting machines, trimming tools, etc. The quality of the mold is related to the number of service life, product quality, and device progress. Most of the GRC products are made of gypsum and produced by FRP turning tools.

1. Some GRC turning molds with common shapes must be cut and combined in multiple pieces to facilitate repeated use. When manufacturing, it is necessary to consider the orientation of the cutting line. In particular, it is necessary to pay attention to the orientation of the tissue cutting line when reversing fiberglass. Otherwise, the output will not only affect the appearance, but also be easy to repair.

2. The manufacture of silicone molds is only used when glass fiber reinforced plastics cannot be replaced. The process of using silica gel should also pay attention to bubbles generated in a timely manner. Because the elasticity of silica gel is more easily deformed after being cured, cement or glass fiber reinforced plastic can be used as a supporting mold after curing (assistance) Molds are easy to shape.

Product production

The quality and quantity of GRC products are related to the progress and plan of the entire project. The progress of production should pay attention to the disruption caused by changes in the program resulting in increased production difficulties, a reasonable distribution can prevent complicated molds can not keep up with production and affect the duration. Qualified GRC products must first use good quality materials: low-basicity, rabitate cement, river sand, alkali-resistant glass fiber mesh (fiber filaments), and 8mm diameter galvanized steel bars.

The quality and progress of the installation are related to the project proposal scheme. Before the installation, the relevant part and the staff should be skillfully presented, combined with practical situations to organize and use it flexibly so as to avoid inadvertently affecting the device quality. The sill edge of the balcony sill must be set aside for mortar powder paste space, so according to the practice of on-site treatment for bump adjustment, but the overall horizontal position can not change too obvious.

There are numerous GRC manufacturers in various provinces, but there are not many manufacturers that really understand the meaning of GRC. There are many classics but many failures.